|
|
|
EZ Marking Marking is easy and affordable |
|
||||||||||||
|
FAQs
Q: How does stylus
marking work? A: The marking characters and graphic
elements is entered and stored in a computer prior marking start. While the stylus
moves following the trajectory generated from marking contents under the
control of the controller and the computer, the pin of the stylus impacts the
marking surface with high frequency vibration driven by compressed air or
electromagnet to create indentations of marking characters and graphics. Q: What kind of
industrial materials could the stylus marking system mark on? A:
Basically, our stylus marking system can be used to mark on any material with
hardness under HRC60,
like tool steels, plastics or wood. The marking depth on different hardness
of materials could be adjusted by using different size
of stylus and adjusting the pressure regulator with the system to get the
best results. Q: Is a fixture
required for marking? A: There
is no much force involved during marking process; you could mark with hand
hold. However a simple fixture for holding parts steady can great improve the
marking quality and efficiency. We provide the service of design fixture for
your parts. Q: Is the marking
system dependable and durable. A: Some of our systems are still running after
installed on production lines for more than 10 years. Q: How long will the
stylus last? A: It depends on the hardness of the material to be
marked and how heavy the system is used. In most of application, the stylus
will last for couple of years. Q: Does the system need
maintenance? A: The system is maintenance free. Q: Do I need a PC
for a simple marking job? A: You could use our economical mode GM108U that mark alphabets numbers, logo and
automatic serial numbers for your simple job. No PC is required for during
marking process and programming. Additional software is available for
creating new fonts and logs. Q: Can I save my
marking profiles? A:
Yes, you can edit and save 10 marking profiles for economical model and
unlimited profile (with unlimited harddrive space). Those profiles could be
quickly loaded and get it started. Q: Do you offer a
marking system that powerful, compact and without an external PC? A:
Yes, check FU2-GM108-EV34 and FU3-GM108-EV34-CR801 for details. Q: Can I mark on
circumference surface of a round part? A:
Yes, with a rotary fixture you can mark in both axial and diameter direction.
Check GM108+EV34+CT2+CR80 and FU3-GM108-EV34-CR801 for details. Q: Can I
automatically mark serial numbers, date and time ? A: Yes. Serial number can be increased or decreased
automatically for marking each part. The steps could be adjusted. The date
and time codes in the marking profile can be updated automatically from the
date and time of the PC. Q: How easy is it to
change the marking job from part to part? A:
You just need load the pre-edited profile and change the fixture to switch
the marking job. Q: What are the
benefits of a marking system with a PC? A: Power and user friendly. Q: Is it easy to learn
how to use the software ? a long learning curve to get familiarized with the
many powerful functions? A: There is little learning curve for using the
software. You could use it for
basic marking application in a little time. It is easy to get familiar with
the powerful functions by following the user manual. You can download our
free demo software and give it a try to see how
easy to create a marking profile. Q: Do I get technical
support. A: Technical
Phone Support available 24/7. Email reply within 24 hours. Spare parts
shipping overnight. |
||||||||||||||
